Tips Guides Resources

Model rockets should never be built with materials such as PVC tubing and rocket engines should not be attached to anything that is not designed to be powered by them. This is extremely dangerous. The materials should be something that will disintegrate if it impacts something. Paper, balsawood or thin plastics.

I also don’t think attaching motors to your RC truck would do much if anything, but be dangerous. If your RC truck weighs anywhere near what my sons does the engine might not even move it. Again, it is very dangerous and you shouldn’t attempt it.

I know these are not the answers you are hoping for, but there is a reason they require ‘adult supervision’ when launching rockets. They can be dangerous if they are not used as they are designed. Model rocket kits have been design to be safe. Checking the CB/CP and many other things. Putting things on any rocket that is not design for it could cause serious injures.

Rocket bodies are very difficult to make. I have only heard of one person successfully making one. What he had done was to grease a stick that he wanted as an inside diameter of the tube. Then wrapped that stick with brown craft paper soaked in white glue. Let it set for a few days and slid the stick out. Nose cones are hard if you don’t have a lathe. Trying to get them symmetrical would be difficult. The nose cone and fins are usually made out of balsa wood or plastic. Larger rockets will use plywood for the fins. Body tubes are always some form of a paper/cardboard tube.

Depending on how you want to run your launches. If you are only going to need one or two launch pads and launch controls, Wal-Mart is your best bet for ‘Starter’ kits ($20). They will include everything you need for your first launch but batteries. Usually the rockets in the starter kits are pre built or need very little assembly. If you want the campers to build their rockets, look for skill level one kits.

The ‘Alpha’ has been around for 30+ years is simple to build and is very stable. It used to be the rocket everyone started with. If you are in need for a lot of kits try EBay. EBay seems to be the only place you can find ‘educator’ sets.

They would include a starter kit and 12 skills level one rocket. Usually ‘Yankees’, another good starter rocket and should be about $4 a rocket. The last thought that comes to mind is your local hobby store. Tell them what you are doing and most ‘mom and pop’ hobby stores should give you a pretty good price. Este’s rockets I think are the best kits for beginners. They seem to have a better fit and finish to them. Remember the skill level one rockets are going to need glue (both white and model glue), paint, and maybe sand paper.

I would think it would be reliable. Just as any staged rocket, the distance from one engine to the next would be the biggest variable that would affect ‘light off’. But, I do not have a lot of experience with staged rockets. My launch sites are not big enough for safe recovery. My only experiences with staged rockets are with C engines. I have never had a failure with one stage lighting the next.

These have been Este’s kits; I have not designed one myself. On the other hand, Estes does not make and E’ engine booster, that I know of. There might be a reason for that. Might be an altitude issue, maybe a light off issue or a weight to thrust issue?

Model rockets have an ejection charge that will push the nose cone and parachute or streamer out. In a tumble recovery rocket, the ejection charge will push the engine casing out the back of the rocket making the rocket unstable and it will tumble back to the ground. This ejection charge is timed from the end of the propulsion phase, which is what shoots the rocket upwards.

If you look at the numbers on a model rocket engine like an Estes A8-3. The A8 tells you how much impulse power it has and how long it will burn. The ‘3′ tells you that 3 seconds after it finishes burning the propulsion phase, it will pop the ejection charge. The reason it doesn’t pop right after it’s done burning the propulsion phase is the rocket can be traveling at 300mph and the little plastic parachute would rip off. Also the rocket continues to fly higher because of momentum.

Victor Epand is an expert consultant at http://www.SellModelRockets.com/. Sell Model Rockets is a community of various independent model rocket sellers from around the world. Each model rocket seller represents a unique style of products all their own. If you have a model rocket to sell, click here to create a Rocket Account.

A “worldview” as James Olthuis defines it is the “Framework or set of fundamental beliefs though which we view the world and our calling and future in it, the integrative and interpretative framework by which order and disorder are judged, and the standard by which reality is managed and pursued.” It is the set of hinges on which all our everyday thinking and doing turns.”

Our worldviews affect everything in our life. They determine our decisions, our moral choices, and what friends we will choose to join our lives. If you think about it on a daily basis-it affects everything from what emotions to choose when someone cuts you off on the freeway, to what television program to turn on or off. It’s what our parents ingrained in us and sometimes God has to deliver us from. It’s the picture of what is morally good or bad in our lives.

Every believer seems to have a bit different set of values in their lives. I believe this could be largely due to their individual worldviews. Scripture sets up a pattern of holiness, right living, and self-control. Society, on the other hand, gives us a pattern of living high as possible, going from one relationship to the next–and just take a look at some of the most current television programs like “wife-swap.” If my worldview says this is acceptable. I receive it and watch it out of interest and freedom. If my worldview says this is immoral and anti-Christian, I choose to ban the program and not allow any of my children to watch it. The latter is my choice, since my worldview is based on scripture, holy living, and loving others like Christ.

My worldview hinges on the scripture: “All scripture is inspired by God.” I believe that the word of God is to be interpreted literally, not figuratively, and cling to the comforting scripture: “Heaven and earth will pass away, but my words will not pass away.”

If I come to a grey area in my life, and I’m unsure what course of action to take, I look to the scriptures for guidance. Most people in the world, I’d say, are used to leaning on intellect for their course of direction and destiny. I’d much rather Jean on the Holy Spirit and the word of God, than my own brains.

I’d like to offer one final example of a difference between my worldview and that of a family member in another state. My cousin believes it is acceptable to live with a man before marriage, take a try at what is to come, and holds a very open view of the scriptures. So much so that she even allows other family members to drink and party in front of her with no objections.

My worldview wouldn’t force the above family members to stop drinking, but I what take a stand, in love, of what is morally right according to the scriptures. My worldview keeps me safe, it guides my steps, and it is a source of constant comfort and joy, because it is based on the Word of God. When I think about the best benefit of my worldview, it has to be the “joy” that comes with it. If I ever had a spiritual name it is “Joy” because I love to laugh and bring out the best in the children I work with, my husband, and my immediate family. After all, my worldview is based on scripture. The Bible states that:

“Everlasting joy shall be upon my head.” That’s why I base my worldview on the Bible, because it grants me hope and joy for today, and for my dates of destiny in Christ Jesus tomorrow.

Don Alexander, Published Writer & Online Business Mentor
http://www.leading-online-business.com
“Helping ALL to Succeed”

From a young age, women are subjected to ideals relating to the size and shape that breasts should be. Women’s self-image and confidence have a strong correlation to breast size. For many women the decision to undergo breast implant surgery just makes sense. And you’ll feel much more comfortable about your decision once you know the facts about breast implants.

Breast implants are certainly about wanting bigger breasts or a more shapely chest, but there is a psychological element as well. Many women say their self confidence increases, and that they feel much better about themselves.

Breast cancer survivors also choose breast implants to rebuild the breast they lost. Many times the implant is put in place at the same time the mastectomy is being done.

For most breast implants, all that is needed is a small incision that’s about 1 inch in length. This incision is made in the fold that is under the breast or in the armpit. If you are having saline implants, a pocket is created and then the implant is inserted. After it is in place, it is inflated with saline.

Your breast implant surgery will take from one to two hours to complete, and you will be required to keep the bandages on for up to 48 hours. Then you will have to wear a support bra for the next three weeks. You will be up and moving around within 24 hours, and the only restrictions for the first month are heavy lifting or other strenuous activities.

After your breast implant surgery, bruising and swelling which will go away over time. The firmness of the breast implant will also diminish over time making the breast feel more natural. Don’t be surprised if you have some pain and discomfort in the first few days after the surgery.

In the United States, saline breast implants are the most common used for breast implant surgery. The shell is made of silicone rubber and then saline is filled into the shell to the appropriate size. Silicone gel implants are also available, although the saline is the number one choice. One great thing about saline is in the event a breast implant does rupture, the solution will be absorbed by the body. There are no health risks associated with it.

Breast augmentation varies in price depending on the type of breast implants, the type of surgery, and who your plastic surgeon is. Don’t go cheap here because cheap could mean that the supplies used are inferior, and as a result, you’ll be looking at nothing but trouble down the road. On average, breast implants run from $3,500 to $10,000. You should not choose a surgeon because of their low price. Your after-surgery health and satisfaction is the important consideration; you do not want to have regrets later.

When choosing a plastic surgeon, make sure you do your research. Don’t be afraid to ask the potential plastic surgeon for references. Once you find a potential surgeon, you should set up a consultation to see if you are both on the same page. Then you can choose the plastic surgeon that you feel is right for the job and things can move forward.

Our world is a place that is rapidly changing, and the technology used to design the modern breast implant has advanced exponentially. With this modern design technology, you can get a perfect-for-you set of breast implants and know that the risks are relatively minor.

If you are ready to have the body you always dreamed of and a great body image, now is the time to see your plastic surgeon to see which breast implants are right for you.

Many women are unhappy with the size or contour of their breasts and are choosing breast implant surgery. The decisions to be made before surgery are often more complicated than the surgery itself. Visit http://www.envisionimplants.com to see our Envision Breast Implant Sizing System. Our system contains the tools to help you make your choice.